In-situ chlorine generator by saltwater chlorination + ph regulator
A chlorine production,
without adding salt into the pool !
An environment-friendly innovation !
Economical salt consumption: only one salt refill per season
Soft and odourless bathing water
Environmentally friendly solution
Ideal for corrosion-sensitive pools
Salt-free waste water
Eco-design: 83% recycled plastics
Single-unit, compact, Poolsquad® iPO
a turnkey solution!
Easy to install and maintain: factory pre-wired reactor, ready to be connected to ready to connect to the hydraulic system
One-piece reactor composed of 5 elements:
– salt tank
– softened water tank
– brine tank
– dosing pumps
– production cell
Easy access to the reactor sub-assemblies thanks to two hatches (top and side)
A simple and efficient operating principle!
Supply of the brine tank and the production cell with softened water (softener optional)
Capacity: 0.8 litre
Tank where softened water and salt are mixed
Tank capacity: 70 litres, equivalent to 2 x 25 kg bags of salt.
The salt used must comply with one of the 4 standards:
NF EN 973 Quality A
NF EN 14805 Type 1
NF EN 16401 Quality A
NF EN16370
The pumps automatically inject the optimum amount of brine and softened water into the production cell.
Brine is mixed with softened water at the entrance to the production circuit
Long life production cell, equipped with 3 to 9 plates depending on the model. The mixture obtained is injected into the circuit of the production cell in order to continuously produce a chlorinated solution called sodium hypochlorite.
Sodium hypochlorite is injected directly into the hydraulic circuit of the pool.
Advanced features
for hassle-free swimming pool!
Low mode to reduce chlorine production with a closed cover or bubble cover installed
Boost mode: 100% super chlorination for up to 24 hours to overcome an increased need for chlorine
Automatic winterization and restart according to the water temperature (15°C)
Safety devices indicated by written message: lack of water, low salt, cell fault, pump fault, pH set point not reached, set point ranges exceeded, water temperature
Permanent display of water temperature and cell life
Log of events
Self-diagnosis program for easy maintenance
pH regulation
for optimized disinfection !
Smart pH : pH regulation proportional to the volume of the pool and predictive
Silent dosing pump
Adjustment of the pH setpoint and display of the value
pH setpoint overrun and overfeeding safeties indicated by written message
Longer lasting Black pH probe, 3 year warranty, factory calibrated
Protective lug for extended probe resistance
e-Pool, the Bluetooth remote control
Bluetooth control of your chlorine generator
Adjustable setpoints and permanent display of the pool values
Activation of Plug & Play options
Probe calibration and simplified maintenance operations
Access to tutorial videos and frequently asked questions
Assist mode: send a report to your pool manager
Device software update available on the application
Free application without subscription
Technical features
| Display | LCD 2 lines |
| pH pump flow (l/h) | 1,8 |
| Corrective agent | pH- or pH+ |
| pH pumpe type | peristaltic |
| pH regulation type | predictive |
| pH setpoint adjustment | 6,8 to 7,6 |
| pH probe calibration | 2 points pH7 and pH10 |
» Voir plus
| pH probe | Black |
| Cell technology | mono or mixte |
| Number of plates into the cell | 3 to 9 |
| Polarity inversion adjustment | off – 12h – 24h |
| Cell assembly | in line |
| Cell orientation | vertical |
| Maximum pressure into the cell (bar) | 2 |
| Reactor pumps flow (l/h) | 10 |
| Salt tank volume (l) | 70 |
| Control box dimensions (mm) | W 267 x H 363 x D 166 |
| Reactor dimensions (mm) | W 450 x H 785 x D 490 |
| Control box + reactor warranty | 2 years |
| Cell warranty | 2+2 years* (*see a retailer) |
| pH probe warranty | 3 years |
» Voir moins
| Models | Pool volume* (m³) | Chlorine production (g/h) | Reference |
|---|---|---|---|
| Poolsquad iPO 8 | 40 | 8 | EPHI23NPSP-G4NM08 |
| Poolsquad iPO 12 | 60 | 12 | EPHI23NPSP-G4NM12 |
| Poolsquad iPO 16 | 80 | 16 | EPHI23NPSP-G4NX16 |
| Poolsquad iPO 23 | 120 | 23 | EPHI23NPSP-G4NX23 |
| Poolsquad iPO 30 | 160 | 30 | EPHI23NPSP-G4NX30 |
| Poolsquad iPO 45 | 200 | 45 | EPHI23NPSP-G4NZ45 |
Content
• Control box
• Reactor
• pH Black probe
• Calibration solution pH 7 & pH 10
• Probe holder, injection connector
• Accessories holder with plugs
• Temperature sensor
• Grounding electrode
• Salt and water hardness analysis kit
• Power cable (2 m)
• Collar Ø 63 mm x2
• Wall support (with screws)
• User manual
Options
• Independent flow switch
• Empty pH can sensor
• e-Pool® Connect connected Pool kit
• Softener
High quality accessories
Accessories holder for easy installation
Ground pool electrode for parasitic currents
Temperature sensor
Words of the pros
“For 15 years, POOL TECHNOLOGIE has provided me with quality service and responsiveness. I know the products well, their reliability is 100%. Another advantage is the electrolysis cell; it is always a delicate point to discuss with a customer because it is an expensive consumable. POOL TECHNOLOGIE’s cell has a much longer service life than those on the market. I notice that instead of an average of 3 to 4 years, the POOL TECHNOLOGIE one lasts more like 5 to 6 years. For us, it is certainly a consumable that we replace less often, but in the end it is a great selling point for our customers. From an electronic point of view, these products hide their game well. They are really very technological, even if you don’t necessarily notice it at first. I’m amazed at the extent to which their technological advance is unknown to the competition…”
Groupe Hyméo (34)
Download your documents
Documentation à venir
Our in situ chlorine generators
